|
|
|
|
Joined: Mar 2007
Posts: 77
Member
|
|
Member
Joined: Mar 2007
Posts: 77 |
I upgraded the T1 card from 4.26 to 4.28 then rebooted the 7400 ksu and now the T1 card doesnt work at all no dial tone and in the version mmc it says no version data, so I tried the upgrade gain, says the same thing, any ideas? Thanks alot
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2005
Posts: 574
Member
|
|
Member
Joined: Jun 2005
Posts: 574 |
Did you wait till update was finished can take 20 mins to update and if you reset it before its done can muck it up and have you looked in 727 to see if update is in there if it is could do a 818 to new software update
|
|
|
|
|
Joined: Mar 2007
Posts: 77
Member
|
|
Member
Joined: Mar 2007
Posts: 77 |
I swapped the card out at the customer site and installed it in a test system at the office to try the upgrade again. Now that there is "no data version" displayed when I upload the file thru 818 it never even completes the process, even after 12 hrs it still shows "media is busy" It is probably hoses up but is there a back door the upload the software on the card?
|
|
|
|
|
Joined: Oct 2010
Posts: 182
Member
|
|
Member
Joined: Oct 2010
Posts: 182 |
What firmware version do you have in the MP40?
Same as Gerrya have said, I have had the same problem. To solve it, you must use MMC818 from the phone.
|
|
|
|
|
Joined: Mar 2007
Posts: 77
Member
|
|
Member
Joined: Mar 2007
Posts: 77 |
yes I uploaded the file to the mmc card via file control then from the phone upload the file to the TEPRI2 card and when it finishes reboot the system but it will never finish the upload to the card. 4.53C
|
|
|
|
|
Joined: Oct 2010
Posts: 182
Member
|
|
Member
Joined: Oct 2010
Posts: 182 |
Try to restore it with 4.26, then try to upgrade it to 4.28.
|
|
|
|
|
Joined: Mar 2007
Posts: 77
Member
|
|
Member
Joined: Mar 2007
Posts: 77 |
|
|
|
|
|
Joined: Nov 2004
Posts: 368
Member
|
|
Member
Joined: Nov 2004
Posts: 368 |
If it shows no ver you will never get it working. You will have to send it to samsung to have it reloaded. The tepri is not like a mgi where you can go in at the shell level and restore.Good luck.
|
|
|
|
Forums84
Topics94,513
Posts639,937
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (JBean3329),
360
guests, and
42
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
