Hey fellas,

I am in the process of installing a refurbished DCS 100 I have an expansion cabinet with 2 trunk cards one in slot 1 and one in slot 2

In the main cabinet I have DLI cards in slots 1-4. Slots 1-2-3 have working ports but no Ext numbers are auto populating.

In slot 4 the Extension numbers are coming up 201 - 208.

My trunks are coming up in programming as
trunk = 225 226 227 228 229 230 231 232
trunk = 233 234 235 236 237 238 239 240

I tried to default the system with MMC811 but it only gives me the option to do a System Reset. Come to think of it Im not certain that I tried to arrow up and see if RESET Memory becomes an option. I will be back out there tomorrow. Any input here is appreciated, thanks to all and have a great weekend.

THE
FLDiver!!!