|
|
|
|
Joined: Oct 2010
Posts: 182
Member
|
|
Member
Joined: Oct 2010
Posts: 182 |
I have a problem with the outgoing CLI. All of the outgoing calls goes out with "private number".
The provider told me that the PBX must send an I12 signal, but the signal sended is I15.
I don't know what parameter changes this in the IT.
Heeellpp!
OS7200
MP20: 4.53c
TEPRIa: 4.28 (E1/R2 - ENM | AR_Wink)
5.10.1 configured in all channels:
Yes | Yes | No | Yes | Yes | Yes | Yes | 1
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2011
Posts: 9
Member
|
|
Member
Joined: Nov 2011
Posts: 9 |
If I remember on the TEPRIa card you do not have to set anything to show the outgoing call on others CID info. By default is will always show the BTN. This is set by default on NI_2. The Phone Line Provider is the one who controls the number going out..ask them to send BTN # out.
You can also change the the CLI Tables in MMC 321 to select a # you want to go out on the PRI if all else fails...this may be easier to just do this.
|
|
|
|
Forums84
Topics94,523
Posts640,000
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (ChrisRR, justbill),
274
guests, and
43
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
