sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems Officeserv 7030

Hi,

I have just inhereted a OS 7030 with no details at all.

I have reset the unit using the reset button on the unit and managed to connect to the unit using the installation tool after moving the switch 6 to on to reset to factory ip address 10.0.2.10.

I am unable to log in to the unit using the default password and username which I have found from an installation manual dated 2008.

Can anyone please tell me the default username and password as the admin and default password does not work on version 4.46e.

I also have another query does the SMT-i3105 phones require an additional psu unless using a PoE switch?

Thanks

Martin

The default user name and password has never changed and yes you will need a psu on the phones if no Poe

Thanks Lacota,

Can you please confirm if the username and password I have sent to you in PM is correct for the default.

As Lacota said it has not changed

Thanks for the assistance I have received details that the admin password had been changed to a different password.

I presume that the reset I have completed has not defaulted the password to factory default.

Seeems your not default the system try puting in differnt area code and defaulting then put uk in and default again might work

if i'm not mistaken the SMTi phones also need a license.

No specifically licenses for the phones themselves, but MGI channels will be needed to be licensed.

Those are the equivalent of a 'line' for the phone(s) to use. Two phones can use one MGI channel, one at a time, that sort of thing ....

We need MGI and phone licences here in the uk, well only for the newer SMT IP Phones.