|
|
Joined: Mar 2007
Posts: 27
Member
|
OP
Member
Joined: Mar 2007
Posts: 27 |
I have a client with an iDCS 100, Had a major storm come through and power went out in the neighborhood. The system is Grounded and was on a power/surge strip. The PRI from Comcast checks out OK. When it is powered up there are no lights on the SVMI4, the PRI Card or the Mem card. BUT the phones light up and say REV V2.1
Did the power supply go bad or the back plane?
We've got you by the Calls!
|
|
|
|
|
Joined: Aug 2007
Posts: 23
Member
|
|
Member
Joined: Aug 2007
Posts: 23 |
Check the fuses in the power supply. I think there are 3 of them.
|
|
|
|
|
Joined: Mar 2007
Posts: 27
Member
|
|
OP
Member
Joined: Mar 2007
Posts: 27 |
Checked those. All 3 are good.
We've got you by the Calls!
|
|
|
|
|
Joined: Sep 2001
Posts: 2,290 Likes: 4
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,290 Likes: 4 |
I would suggest that the power supply is your problem.Although I have seen an MCP1 card taken out upon a power up.
|
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
If you service 100s, you MUST keep at least 1 and best 2 power supplies on hand.
The power supplies were built with underpowered capacitors and will last awhile but there are 4 that get replaced when repaired, not just the two big ones.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
Forums84
Topics93,819
Posts636,734
Members49,641
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
199
guests, and
57
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
