New guy on board

Print Thread

Rate Thread

Page 2 of 2

Re: New guy on board #444263 11/21/06 03:18 AM
Joined: Sep 2006 Posts: 87 Boise, ID HJB Member
HJB Member Joined: Sep 2006 Posts: 87 Boise, ID	Quote Originally posted by bfdatacom: OK Hal - perhaps the wimpy RG59 was not shielded enough?(like the quad-shielded RG6). I really can't say that I know for sure. I would like to find out. RG59 has a lighter wire gauge than RG6/11/500 cable. RG59 typically sports a 20awg conductor RG6 typically has an 18awg conductor RG11 is typically 14awg Hardline coax typically has a .109" conductor Hans Broesicke, RCDD

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: New guy on board #444264 11/21/06 06:42 AM
Joined: Jun 2006 Posts: 512 Pa. jacktel Member
jacktel Member Joined: Jun 2006 Posts: 512 Pa.	For customers using cable{Comcast} in my area,old RG59 will not support internet cable modems, but will work fine for tv. 90% copper shield or so for good cable. RG6 and your good to go either way.I wired a site and added a drop of old stock RG 59 and had to replace, now just stock RG6.-------John

Page 2 of 2

Moderated by Silversam

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums Wiring - Telecom Carriers - Trunks & Services Cabling Telephones Systems Wiring New guy on board