sundance-communications.com/forum Forums Wiring - Telecom Carriers - Trunks & Services Cabling Telephones Systems Wiring Fiber Optic transceivers

I posted this question in network section too. Thought it might be better here. Thanks


I'm looking for a couple F/O transceivers that have 1 pair of MM 62.5 for the F/O link with 4 independent Ethernet 10/100 ports. Not a switch and I don't care which style connector on the fiber ends. I've run out of fibers at one location and new fibers are not an option and I need a couple dedicated network lines in a hurry. They should have listened when I said “If it were me, I would do no less than 24 strand fiber” and they decided to do 12 strand. The money they would have put out then would have been less than buying all these fiber transceivers and switches. Oh well I guess this sort of thing is typical! Although it’s very gratifying sometimes to say “told you so”!

You may also want to look at transceivers that will do full Ethernet on just one strand. I know that they exist for single-mode. Not sure about multimode.
Mike

I think this is what you're looking for https://www.alliedtelesyn.com/products/details.aspx?26 (1) fiber/(8) ethernet switch
Let me know if you need a price.

thanks found what i needed

You could also take the MM units and put a wdm on the laser/led and put it onto one strand, provided you could get the wavelengths matched.