|
|
|
|
Joined: Apr 2001
Posts: 11
Member
|
|
Member
Joined: Apr 2001
Posts: 11 |
Is there anyway to assign a numerical key to access an outside line on an IDS 42? (eg, dialing 9 to access a line pool). Some people in the office here just have trouble pusing a CO button.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2001
Posts: 2,360 Likes: 9
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,360 Likes: 9 |
O.K.,
Forgive me but my IDS manual is a little out of date and I'm not a dealer anymore.There is an option on the bigger systems to do this .It is on the M screen system options and is called alternate dialing.If set to yes,dialling 9 accesses trunk group 1 and 8 accesses group 8.You cannot dial access lines using this or other groups.There are other restrictions too.Check this screen to see if the option is available to do this.If not,to dial access a group it is a 4 digit code 93 + the 2 digit trunk group (01-10) for digital sets and 91-90 for single line sets.
Hope that helps you out.If alternate dialling is not available to you,then it's easier to push an outside line button than dial a code.
[This message has been edited by pvj (edited December 10, 2001).]
|
|
|
|
Forums84
Topics94,565
Posts640,180
Members49,869
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
15
guests, and
52
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
