sundance-communications.com/forum Forums Other TDM Phone Systems Executone-Isoetec Telephones & Systems IDS84 Model 32 Date Wrong?

Help, I came into work today and the date showing on little view says Sunday November 3 not Monday November 4. I don't know how to change the date with 2 digit code from the operator station, I know how to change the time which is 28 and then the 4 digit time. I don't want to spend $100 to call Nextiraone to get this answer was hoping someone out there would know the 2 digit code. Thank you!

I'm not to sure if you can set the date.But,here's how to fool it.OK,it's Monday and the phone system says it's Sunday.Set the time to 23:59 on Sunday.Let it roll over to Monday and then reset the time to the correct time.Remember,the clock is a 24 hour clock.Maybe with the time change this was set wrong and your clock is 12 hours slow?

[This message has been edited by pvj (edited November 04, 2002).]

1. Set Time for Phone System from Operator Phone (must be y2k compliant)
Dial 28
Enter time in Military format
Hang-up

2. Set Time for Phone System from Operator Terminal
Press Control C
Enter Time Military format
(Note: Press enter key to change date)
Press Escape key to exit out

Good Luck!!

To set the date you need a operator CRT or PC to access system programing.