sundance-communications.com/forum Forums Other TDM Phone Systems Executone-Isoetec Telephones & Systems time setting, IDS 228 w / Eclipse 3.0

Looking for the procedure to set the time on an IDS with Eclipse 3.0 software. Can it be set by the customer from extension 3000 or do I need to set it from a pc / terminal?
Yea, I installed it just a couple months ago but don't remember the procedure and the manuals belonged to the customer - 100 miles away. Thanks.

https://www.tel-programmer.com/Time%20setting/executone_time.htm

hope this helps.
markk

1. Phone System from Operator Terminal
Press Control C
Enter Time Military format
(Note: Press enter key to change date)
Press Escape key to exit out

2. Phone System from Operator Phone
Dial 28
Enter time in Military format
Hang-up


Good Luck!!

Hey Jeff,
Does that work on the IDS 42 operator phone also?

Rick

Thanks, we'll give it a try.

]Originally posted by JJ:
1. Phone System from Operator Terminal
Press Control C
Enter Time Military format
(Note: Press enter key to change date)
Press Escape key to exit out

2. Phone System from Operator Phone
Dial 28
Enter time in Military format
Hang-up


Good Luck!![/QUOTE]

It may work depending on the software version of the IDS 42 and if the Time option is loaded on the system.

Rick,
PVJ answered the question. If Y2K yes.

Latter,
JJ