sundance-communications.com/forum Forums Other TDM Phone Systems ESI Telephones & Systems esi ivx crosstalk

I had a customer call me about there esi phone system they are hearing crosstalk between their lines. they have 2 co lines and when 2 people are on the 2 different lines they can here each other press buttons and talk. any ideas what is going on here the co lines up to the phone system are good no bleed or cross talk before the ksu.

Matt

What ESI system are we talking about. First thing is, check the wiring from the switch tails to the D-marc (cross connects). Has this always been an issue? If all that is checked out, try moving those to lines to a different line number like co3 and co4. Make sure the amphenol is in all the way and is not loose. Also, make sure you do not have a short on the amphenol.

Let us know what you find out.

THe phone system is a first generation ivx system. The customer thinks it is 9 years old. Every thing checks out out side of the unit itself. Not knowing how to program the unit is a problem also the 3rd and 4th co lines are not active on the system so i cannot put those on the system to see if that works. Is there a programing manuel i could get from someone on here so i can activate those other lines.

mattcav1... yes the first gen 20's are about 9-10 years old. Boasting analog phones with 3 park keys (EKT-A) and a 4, wire circuit.

If your still having problems, holler at me between 10am and 4pm Mon. - Fri. I can get you rollin' in the right direction. 5-10 minutes tops and you will know all you need to know about trouble shooting your problem.