|
|
Joined: Nov 2004
Posts: 6
Member
|
OP
Member
Joined: Nov 2004
Posts: 6 |
I have an ids 42 which I can not get to go into program mode. It was mothballed for over two years. I can get my wyse 50 emulation to connect, but no other software.
u41 and u42 chips are labeled as 8.0.1
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2001
Posts: 2,306 Likes: 6
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,306 Likes: 6 |
What are you getting an operator screen?If that's what you have then press Ctrl-P to access the programming mode.This may be defaulted to the serial port being an operator screen.This can be changed on the B screen under operator where the operator is assigned a port.Just go to that and remove itby pressing N I think and it will become a programming port.
|
|
|
|
|
Joined: Nov 2004
Posts: 6
Member
|
|
OP
Member
Joined: Nov 2004
Posts: 6 |
Thanks, You were correct. I jumped in to the programming screen no problem.
Thanks again..
|
|
|
|
Forums84
Topics93,959
Posts637,375
Members49,702
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
9
guests, and
35
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
