|
|
Joined: Dec 2004
Posts: 37
Member
|
Member
Joined: Dec 2004
Posts: 37 |
I have an IDS 42 that I pulled out of storage. I am unable to get to the programing screen, When I connect my procom+ to the I/O port I get the operator screen and am unable to press escape to get into the programing. Also when I plug in my M18 Display phones the LCDS only show Executon Information Systems. The Chips on the CPU say executone 1998 8.2.4
I have the technical Manual but can't seem to find anything that tells me how to reset the i/o port or get the programing screen up. Please Help!
Joshua R. Flores
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Sep 2001
Posts: 2,360 Likes: 9
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,360 Likes: 9 |
Try Ctrl-P to access programming.You need to remove the port as an operator port on the B screen.
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
Member
Joined: Apr 2002
Posts: 1,101 |
Good Software. It is Y2k compatible.
Just do as PVJ stated and you are good to go.
Good Luck!!
If all else fails, use a BFH.
|
|
|
Forums84
Topics94,513
Posts639,939
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
142
guests, and
44
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|