Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
IVX-128-PLUS + Centrex CID issues
#466159 01/28/10 08:31 AM
Joined: Jan 2010
Posts: 3
Petrus Offline OP
Member
OP Offline
Member
Joined: Jan 2010
Posts: 3
For months now we have been trying to get our Caller ID working on this system.

We have an IVX-128-PLUS system
Verizon Centrex lines

Currently CID works intermittently.

I have monitored CID where the phone lines come into the building and CID info comes in at all times.

Verizon has tested our lines and says that all lines are showing CID correctly.

Our installer has looked at this and has had ESI look into it. ESI via our installer says the issue is with our voice provider (Verizon) and that the CID info is coming in too late. Verizon says CID info is all good and there is nothing they can do to change how the CID info comes in on our lines.

We recently had our older IVX-128 system break down and replaced it with an IVX-128-PLUS system.


CID issues are still the same.

We would appreciate any help on getting our CID work. I hoping others have encountered similar problems and that there is a solution.

Thanks in advance.

Petrus.

ESI search for systems, cards, phones!
Re: IVX-128-PLUS + Centrex CID issues
#466160 01/28/10 05:15 PM
Joined: Nov 2004
Posts: 1,550
Moderator-ESI - Executone
*****
Offline
Moderator-ESI - Executone
*****
Joined: Nov 2004
Posts: 1,550
You need your Installer to Tell ESI to FIX it( it can be done) actually Your Installer may have access to the field that needs to be adjusted ( fine tuned) it is a default value in ALL Esi systems and it usually works very well

Tell your installer to try F16-6 caller ID Gain, depending upon the software of the system, He may be able to get it thru the phone try a value of 11000. tell him to look at the value that is curently there(default is 20000)


I can see the light at the end of the tunnel..

Retirement 2019 ( It has happened )
Re: IVX-128-PLUS + Centrex CID issues
#466161 01/31/10 01:59 PM
Joined: Jan 2010
Posts: 3
Petrus Offline OP
Member
OP Offline
Member
Joined: Jan 2010
Posts: 3
Thanks Brian! Esi did try to adjust some settings with the first system.. and although it seemed to get better, they never got it totally right and at one point we got scrambled CID info...
I am not sure if my installer is going to try this again since they have tried many times with ESI and finally ESI said that it is our service provider.

Have you ever heard of Verizon centrex lines having issues with ESI IVX 128 systems? The installer said that I needed to ask Verizon to move caller ID info forward since the information was coming in too late. Verizon had no idea what I was talking about.

Re: IVX-128-PLUS + Centrex CID issues
#466162 01/31/10 03:58 PM
Joined: Nov 2004
Posts: 1,550
Moderator-ESI - Executone
*****
Offline
Moderator-ESI - Executone
*****
Joined: Nov 2004
Posts: 1,550
Unfortunatly, Most Carrier's these days, just say " Here it is " and leave the equipment manufacture's hang out dry, It is one of those settimgs that has to be messed with, it may take several trys to get it working, If Your installer can get ESI on the phone and into the system, they can " see " what is going on and maybe able to make a recomdation as to what Value needs to be in that field, Good Luck !


I can see the light at the end of the tunnel..

Retirement 2019 ( It has happened )
Re: IVX-128-PLUS + Centrex CID issues
#466163 02/05/10 11:21 AM
Joined: May 2005
Posts: 450
Member
Offline
Member
Joined: May 2005
Posts: 450
I find that the problem with intermittent caller ID usually happens when the first ring to come down the line from the central office is far too short. This can happen in older CO's. Regardless, the CID follows the first ring. In this case, as far as the ESI switch is concerned there never was caller ID. It needs to detect the first ring in order to look for the CID, which it can't because 1/10 second isn't long enough. Some carriers seem to consider a 1/10 sec. burst as a valid ring cadence :shrug:


Brian Dunne
ETC Telecom
www.etctele.com

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
Headset in-use relay
by SST - 07/08/20 06:33 PM
Partner ACS AA
by mtncomm1 - 07/08/20 04:18 PM
Samsung SVMI20i
by crazy canuck - 07/08/20 03:40 PM
Help with Electra Elite IPK
by ECI Tech - 07/08/20 11:56 AM
SL2100 New comer
by Biztel Cuban Okie Tech - 07/07/20 08:44 PM
Who's Online Now
32 members (ECI Tech, Skunky, Rok1215, EV607797, nortelvoip, justbill, Bob3470, Silversam, Yoda, RATHER BE FISHING, Carl Navarro, STS E, Bob-o, SST, hbiss, Curlycord, hitechcomm, pvj, jeffmoss26, Mercenary Roadie, JBean3329, ThePhoneConnection, mtncomm1, crazy canuck, barrick, nfcphoneman, Touch Tone Tommy, newtecky, MooreTel, Telesystems, VIBob, mike b), 353 guests, and 64 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,804
Posts636,316
Members49,310
Most Online5,661
May 23rd, 2018
Today's Birthdays
birdlady710, haegercp, tedparkes
Newest Members
StevCom, DaleG, jlspeck, Real Estating, ForestHillChurch
49310 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 23
dans 10
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners