adding DID on an ESI-200

Print Thread

Rate Thread

adding DID on an ESI-200 #467133 03/22/12 10:23 AM
Joined: Nov 2007 Posts: 6 Oklahoma City Randyp45 Member
Randyp45 Member Joined: Nov 2007 Posts: 6 Oklahoma City	I have an ESI-200 system and I need to add a DID number. I have a block of 100 DID numbers pointing to my system from my PRI and have several DID already programmed on it. Can someone help me, from step 1, on how to add a DID to a port/extension? I want to be able to call a DID number and ring straight to the set. Thanks for your help!

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: adding DID on an ESI-200 #467134 03/22/12 09:26 PM
Joined: Aug 2002 Posts: 2,608 Albany, N.Y. USA upstateny Moderator-ESI, Shoretel
upstateny Moderator-ESI, Shoretel Joined: Aug 2002 Posts: 2,608 Albany, N.Y. USA	It is very straightforward - just program the DID to ring to the extension you want. John Corrigan New Phone Systems and Service

Re: adding DID on an ESI-200 #467135 03/23/12 01:20 AM
Joined: Mar 2010 Posts: 22 Virginia LaTuFu Member
LaTuFu Member Joined: Mar 2010 Posts: 22 Virginia	Your reseller can make this programming change via remote access, very easily. (If you do not want to deal with it.)

Re: adding DID on an ESI-200 #467136 03/30/12 07:16 AM
Joined: Jul 2009 Posts: 59 Tulsa,Oklahoma twinlava Member
twinlava Member Joined: Jul 2009 Posts: 59 Tulsa,Oklahoma	Add the DID number in F224 and point it where you want it to go

Moderated by 5years&counting, nonameyet

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums Other TDM Phone Systems ESI Telephones & Systems adding DID on an ESI-200