|
|
|
|
Joined: Aug 2006
Posts: 6
Member
|
|
Member
Joined: Aug 2006
Posts: 6 |
I'm having a problem with international calls going into the vmi's mailboxes. Operator transfers caller to an ext and instead of it going into the mailbox after the call forward timer elapses it recalls back to the operator. There is fixed call forward set on the ext. Even if you try to manually transfer using the MBA button the caller only goes to main greeting or the caller hears that the ext you're tring to reach isn't valid. This only happens with international calls.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2006
Posts: 1,812 Likes: 15
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,812 Likes: 15 |
Verify that a mailbox exists for the extension question.At the very least, an 'invalid' message from the VMI means someting is not right with he mailbox in question, either missing a greetng message or non-existent.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
|
Joined: Oct 2004
Posts: 180
Member
|
|
Member
Joined: Oct 2004
Posts: 180 |
Check 04.71.14 (trunk packets) in the Adix, you can probably turn it off or change the settings in the voicemail to route based on what you are getting from the telco....
|
|
|
|
Forums84
Topics94,522
Posts639,999
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (MooreTel),
122
guests, and
53
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
