sundance-communications.com/forum Forums VOIP Phones & IP PBX VoIP & Cloud Phones, Hosted PBX, General IP Phones VOIP Dial Tone

For those of you who have customers asking for VOIP dial tone and are not satisfied with Vonage--take note. We just completed lab tests today between a hardware manufacturer and a SIP dial tone provider with success. After running into dificulty with Vonage I decided there has to be something better & did the testing myself. The result is that I've come up with a solution that might be of interest to some of you. Here's what we can do 1) support disconnection supervision 2) support as many lines as you want with only 1 DID and do busy rollover just like your CO does. 3) support both inbound & outbound caller ID 4) support QOS to help ensure quality of service. 5) We can do this on a DSL/Cable all the way up to 3 T1s.

You have my attention.

Sounds good to me!

------------------
| Capitol Communications | Telephone Systems

Now your talkin.

I would like to hear more !

I am also interested although we have achieved the same by installing the business plus which use media gateways rather than the Linksys or Motorola routers, the only part we haven't been able to do is the outbound caller ID.

But please share the information

------------------
One stop Voice and Data Solutions VoIP

As far as inbound routing.

Do you have to basically assign a number to a trunk, then assign the trunk to an extension?

vs.

Routing the call based on the number dialed without permantely assigning it to an invididual trunk that is permantely assigned to an extension? Where the number will basically come in on any trunk that happens to be available then transfering it to the extension?

Fisher:
What you are asking for is IP trunking on an IP-PBX. This is not the same as replaceing ILEC dial tone with VOIP dial tone like I'm working on.
Check out https://www.epygi.com/ for DID translations. I believe their product can do what you're looking for.

At this point we have no sales channel by which to purchase the solution I'm working on. If you wish to be updated as soon as a sales channel is established send me an email & I'll put you on my mailing list. Still working with the services provider & the gateway manuf. to try to make this solution official. The gateway manuf. & service provider were talking today about comming up with an agreement. When this is done I'll release info.

OK. We've just finished our first customer install using this solution. We have a DID number plus a toll free number pointed to the gateway with busy rollover from ports 1-4 & then another DID + toll free pointed to the same gateway with busy rollover from ports 5-8. Outbound CID is also split with the rollover groups. Everything has worked out well & customer is happy.

Here's how we're doing it. We're using the Patton 4520 series gateway & Nexvortex service. You can get the gateways from a supplier of your choice & order the service through us. We will assist with the configuration. Rates are 2.5 cents per minute + $10.00/mo for the DID, no limitation on number of lines, no set up fee.