|
|
|
|
Joined: Sep 2005
Posts: 1
Member
|
OP
Member
Joined: Sep 2005
Posts: 1 |
I am trying to find info on how to setup a VoIP system to connect 4 offices together so that users can transfer calls between sites as if they were on the same system.
Our main office has an Executone 108, the other offices just have 3-4 PSTN lines. I have been looking at Asterisk open source and was wondering if there is a way to use our existing 108 with Asterisk. We use ACD on the 108 in the main office and would like to have a way that callers hitting the 108's ACD groups would be directed to extensions (both local and remote) - no matter where they are located at any of the 4 offices. The main office has a T-1 card in the 108 and we have a separate data T-1 for Internet. The other offices have DSL connections and are connected to the main office via a VPN between their firewalls.
Any insight would be greatly appreciated.
Jeff
Sys Admin
Portland, OR
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2004
Posts: 1,580 Likes: 1
Moderator-ESI - Executone
|
|
Moderator-ESI - Executone
Joined: Nov 2004
Posts: 1,580 Likes: 1 |
Ain't gonna happen :>(
Not unless you had at least a 108 at each of the other office's...then it ' might work '
You would also need certain ' options ' turned on in each of those 108's..
A LOT of $$$
Maybe Time to look at a system that is CAPABLE of VOIP....
I can see the light at the end of the tunnel..
Retirement 2019 ( It has happened )
|
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
|
Member
Joined: Apr 2002
Posts: 1,101 |
Check out RAD IPmux.
IPmux-1 and IPmux-1E are
TDMoIP gateways enabling
E1/T1, ISDN-BRI, and FXS
communication over
asynchronous IP and
Ethernet networks
• Ethernet network port
supports either copper UTP
or fiber options
• Optional Ethernet user port
offers:
�� Transparent LAN bridging
�� User data bandwidth
management through rate limiting
• Both structured (full or
fractional) and unframed
E1/T1 are supported
• Two-wire FXS voice ports
support standard analog
telephones and key systems
Good Luck!!
If all else fails, use a BFH.
|
|
|
|
|
Joined: Jun 2005
Posts: 23
Member
|
|
Member
Joined: Jun 2005
Posts: 23 |
We currently have an Asterisk iPBX connected to our Executone. If you can find a way to route the call from your ACD queue out the T1 channel to the Asterisk then you can do whatever you want at that point. If you have an Asterisk server at each of the locations.
How many phone calls do you expect concurrently in the remote offices? I ask because with only a DSL line you may run into bandwidth issues.
|
|
|
|
Forums84
Topics94,291
Posts638,813
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
