Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Need to know . . .
#475425 07/12/06 06:32 PM
Joined: Jul 2006
Posts: 7
Member
OP Offline
Member
Joined: Jul 2006
Posts: 7
Hello,


I am a percussionist in Chicago and I have a Western Electric 2500 MMG that I need to make ring for a sound effect. I have removed the ringer assembly and mounted it onto a board. There is a black wire and a red wire. I’ve tried 8 volts, 9, 12 and up to 30 volts with nothing more than a twitch of the clapper.

What I need to know is – how much voltage do I need to pump through this thing to get it to ring?!

Telephone Equipment Search
Re: Need to know . . .
#475426 07/12/06 07:04 PM
Joined: Oct 2001
Posts: 6,160
Member
Offline
Member
Joined: Oct 2001
Posts: 6,160
ring current is (and I might be off a little) 90 to 110 V at 30 cycles, not your standard 60 cycles. An old 1A2 power supply or a ring down circuit would provide the correct power.
You might post your question in the 1A2 forum and get a better answer. One of those guys could probably dig up an old power supply for you for cheap too.

Mark

Re: Need to know . . .
#475427 07/12/06 07:43 PM
Joined: Jan 2005
Posts: 15,203
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Offline
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Joined: Jan 2005
Posts: 15,203
Mark is correct here. Despite the fact that these ringers operate on voltages similar to that of a standard electrical outlet, they are frequency-sensitive so the 60 cycles received from an electrical outlet won't really help you. These ringers only respond to alternating current (AC), not DC which is provided by batteries. They usually respond to 20-33 cycles.

Do you just need to borrow a ring generator for this application? I am sure we can arrange a loan or rental of one if you just need it temporarily. Just post back and someone here will assist you.


Ed Vaughn, MBSWWYPBX
Re: Need to know . . .
#475428 07/13/06 01:51 AM
Joined: Jul 2006
Posts: 7
Member
OP Offline
Member
Joined: Jul 2006
Posts: 7
WOW! Those were fast replys! Thanks for all of the info, Mark and Ed.

I would need this power supply for an extended amount of time (months!). And, as I often get called upon to supply sound effects (telephone particularly, for some reason) I would probably go ahead and purchase one, provided I won't have to remortgage the home!

I will post on the forum you suggested, Mark.

Thanks VERY much, guys, you saved the day.

Sincerely,
Rich A.
Chicago

Re: Need to know . . .
#475429 07/13/06 06:46 AM
Joined: Apr 2004
Posts: 207
Chris Howard
Offline
Chris Howard
Joined: Apr 2004
Posts: 207
The old bell system 515-key system had a power supply that would put out 48V and that was used for ringing.


William C. Howard
Re: Need to know . . .
#475430 07/13/06 07:23 AM
Joined: Jan 2005
Posts: 15,203
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Offline
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Joined: Jan 2005
Posts: 15,203
Rich:

Perhaps the least expensive solution to your need will be to purchase a Viking Electronics PS48-RG which is available from any local telephone equipment supply house. You should be able to locate a Graybar Electric branch in you area that will sell it to you.


Ed Vaughn, MBSWWYPBX
Re: Need to know . . .
#475431 07/13/06 01:27 PM
Joined: Oct 2001
Posts: 6,160
Member
Offline
Member
Joined: Oct 2001
Posts: 6,160
That's what I was thinking, a ring down circuit would be cheap and easy if he understands how to make it work. You could put in a switch to simulate an off hook condition with the phone or ringer on the other end.
Mark


Link Copied to Clipboard
Forum Search
Most Recent 5 Post
ESI 900
by TheGreatMiah - 07/06/20 05:07 PM
Kari's Law and Basic Edition
by ffej010 - 07/04/20 07:10 PM
IP Office 500 vers. 9.0
by Telesystems - 07/03/20 05:27 PM
Who's Online Now
35 members (nortelvoip, Curlycord, Telesystems, hbiss, RATHER BE FISHING, Mercenary Roadie, Carl Navarro, Yoda, Bob-o, bdunne, dexman, dukane123, BobRobert, Touch Tone Tommy, DaleG, justbill, NTlayoff, pvj, Arthur P. Bloom, JBean3329, Meyery2k, andyphones, Silversam, Bob3470, Professor Shadow, iatech3800, nfcphoneman, dans, Shelbyrich, TheGreatMiah, Bushmills, Ironhedz, newtecky, KRRath, Memphisribs), 489 guests, and 55 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,798
Posts636,285
Members49,309
Most Online5,661
May 23rd, 2018
Today's Birthdays
michael simpson, Wayne D.
Newest Members
jlspeck, Real Estating, ForestHillChurch, Rick95, Byron Stewart
49308 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 23
dans 10
Ruben 9
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners