|
|
|
|
Joined: Jul 2005
Posts: 1,184
Member
|
Member
Joined: Jul 2005
Posts: 1,184 |
I don't believe you can use the graphics keypad to do initial programming. You must use a two line alpha for this.
BTW, on your vista 10, the reason I was asking if you installed it or not, on that panel the master code is the installer code. They didn't use two codes on that model. So the sequence would be: Master Code, Code Button, 0 to get in.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2006
Posts: 19
Member
|
|
Member
Joined: Sep 2006
Posts: 19 |
and dont oyu have to have a special keypad for programming. alot of these "package" systems sold, do not come with the right keypad for programming. i am not a big user of ademco products, but do service several places with them and have run into issues with this.
|
|
|
|
|
Joined: Jul 2006
Posts: 8
Member
|
|
OP
Member
Joined: Jul 2006
Posts: 8 |
Thanks everyone for the help, I now have it working. I now have a new 20P and I was able to do the programming with the 6270 touchpad. The new 20P had the touchpad enabled by default out of the box. I sure learned a lot this last week. Now on to my next project installing a couple cameras inside and out.
|
|
|
|
|
Joined: Dec 2005
Posts: 2,928
Member
|
|
Member
Joined: Dec 2005
Posts: 2,928 |
Glas to hear it is working, thanks for the update. Good luck on the cameras
I Swear I did not touch anything 
|
|
|
|
Forums84
Topics94,299
Posts638,872
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
101
guests, and
299
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
