|
|
|
|
Joined: Jun 2008
Posts: 1
Member
|
|
Member
Joined: Jun 2008
Posts: 1 |
Hi, we have two Crown Jewel units working fine but not allowing me to enter programming mode. Each is on a separate line. I am wanting to reprogram them, however they don't pick up a line when I try to ring in from a remote phone and they won't accept me trying to log in via the keypad either - keypad beeps as I hit the keys, but otherwise I get silence from the speaker. Both methods have previously worked. The intercoms are connected as extensions on our PABX and I have changed the default password. Is there anything I can do or is this an indication the units are faulty? I have been through the installation and programming guides to no avail. We have another crown jewel on another gate that is fine.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2006
Posts: 2,039
Member
|
|
Member
Joined: Apr 2006
Posts: 2,039 |
 to the board. I know nothing about Crown Jewel units but it sounds as if the programming may have defaulted. Have you tried the default installers code?
|
|
|
|
Forums84
Topics94,551
Posts640,097
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (JBean3329),
144
guests, and
25
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
