|
|
|
|
Joined: Dec 2005
Posts: 2,928
Member
|
|
Member
Joined: Dec 2005
Posts: 2,928 |
I have an odd problem on this panel. I am not using NAC4. But it keeps giving me a trouble report. I have 4.7 resistors across nacs 2 and 4. NAC 1,2 and 3 are fine.(I am using NAC 1 and 3) This only started happening after conducting a drill on the panel. Everything else is still working fine. Does anyone know of a way to completely remove this NAC from the system to clear this issue? OR does anyone else have any suggetions? I replaced the resistor already, and have tried cold reboots. :confused: :confused:
I Swear I did not touch anything 
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2006
Posts: 2,039
Member
|
|
Member
Joined: Apr 2006
Posts: 2,039 |
I'm not sure if it's possible to remove it from programming. (I've never had a reason to try it)
NAC's can be disabled but that will display another trouble all the time and it won't fix the problem.
I would go into programming and confirm that the circuit is programmed correctly using NAC 1,2, or 3 as a template.
If it is correct and the 4.7K resistor is good then you have a problem on the mother board and it needs to be repaired or replaced.
|
|
|
|
|
Joined: Dec 2005
Posts: 2,928
Member
|
|
Member
Joined: Dec 2005
Posts: 2,928 |
thanks bobby..I am thinking it is a mother board problem..I did a stare and compare on the other nacs and no good. I may need to send it out....but was hoping to avoid that...ohh well. I guess it is what it is
I Swear I did not touch anything
|
|
|
|
Forums84
Topics94,553
Posts640,115
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
29
guests, and
87
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
