EMP & Lightning Home Surge Protection
EMP - Click Here!
Phone.com 300x250
300x250 Your Business Phone Service in the Cloud
Global Test Supply
defencebyte.com
Antiransomware
vpnproxymaster
Turn your commission checks on autopilot with 50% RECURRING COMMISSIONS!
Flexibits
Meticore Weight Loss Voted #1.
Get leads. Get sales. Get growing with Getresponse
Get leads. Get sales. Get growing. [2]
Previous Thread
Next Thread
Print Thread
Rate Thread
#482639 10/27/11 06:23 AM
Joined: Jul 2009
Posts: 35
Member
OP Offline
Member
Joined: Jul 2009
Posts: 35
Hello - does anyone have any experience using the Valcom VIP 801 & 811 devices for paging.
I have two of the 811 devices at two different locations at a customer site. I can get either one or the other device to page but not both at the same time.
If I change the Auto destination in the 801 to match either device it works but not both at the same time. Valcom tech support doesn't seem to know much about this system and can't seem to help. HELP!!

Linked Banner to your Product or Website
#482640 10/27/11 11:45 AM
Joined: Mar 2001
Posts: 3,268
Moderator-Allworx, Nisuko-Tie, Vodavi
Offline
Moderator-Allworx, Nisuko-Tie, Vodavi
Joined: Mar 2001
Posts: 3,268
*******Valcom tech support doesn't seem to know much about this system and can't seem to help.*****

That seems odd---they're usually very knowledgeable & helpful.

Are you sure you don't have some sort of a problem with "broadcast" settings in your switches or phone system?? What kind of a phone system are you working with?? Just guessing, here..... My experience with IP Paging is VERY limited. Hope someone jumps in here that has done this before. Good luck.

#482641 10/28/11 05:49 AM
Joined: Jun 2004
Posts: 4,548
Moderator-Comdial, ESI, Voicemail, Cisco
Offline
Moderator-Comdial, ESI, Voicemail, Cisco
Joined: Jun 2004
Posts: 4,548
Do these devices use multicast? If so, you may not have multicast configured correctly on your network.

Justin

#482642 10/28/11 12:51 PM
Joined: Oct 2011
Posts: 3
Member
Offline
Member
Joined: Oct 2011
Posts: 3
As the previous response noted, multicast is required for paging to multiple destinations.
Please contact us again at Valcom Technical Support if we have not adequately helped resolve the problem. Our phone is 800-825-2661 or email at [email protected]

Valcom Technical Support


Moderated by  metelcom 

Link Copied to Clipboard
Advertising Sponsor
Popular Topics (Views)
Forum Statistics
Forums94
Topics94,431
Posts639,813
Members49,470
Most Online5,661
May 23rd, 2018
Today's Birthdays
daleturb, GaryWJC, Mark F
Newest Members
AndreLS, JimLafleur, EssKayKay, xmestedex, PhoneGuy007
49,469 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
Top Posters (30 Days)
dexman 14
www.aweber.com
landing page builder
NordVPN
Advertising Sponsor Spot 2
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Who's Online Now
14 members (pvj, Curlycord, justbill, Professor Shadow, RUSS K., BrianS, teldata1, JBean3329, BobRobert, Skunky, BezLovesITAD, telecom guy10, Meyery2k, ffej010), 106 guests, and 75 robots.
Key: Admin, Global Mod, Mod
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2021
Trusted Partners
landing page builder Antiransomware 300x250 Your Business Phone Service in the Cloud