|
|
Joined: Dec 2002
Posts: 348
Member
|
Member
Joined: Dec 2002
Posts: 348 |
Is anybody else experiencing low volume problems on IP phones? We have a customer complaining and holding up an install for the last 6 months because the volume on the T208's and Flexset-IP's aren't loud enough for them.
Never blame on malice, what can be adequately attributed to STUPIDITY!!
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
Have you increased the gain levels and are you running g7.11?
|
|
|
|
Joined: Dec 2002
Posts: 348
Member
|
Member
Joined: Dec 2002
Posts: 348 |
729 + 80, I was told gain does not work on IP phones.
Never blame on malice, what can be adequately attributed to STUPIDITY!!
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
I had that very issue and went to g7.11. Hmm, have you tried upping the gain on an IP set? I remember doing it on a UGW and seemed to work.
|
|
|
|
Joined: Dec 2002
Posts: 348
Member
|
Member
Joined: Dec 2002
Posts: 348 |
On the UGW? I'll try that one.
Never blame on malice, what can be adequately attributed to STUPIDITY!!
|
|
|
|
Joined: Dec 2002
Posts: 348
Member
|
Member
Joined: Dec 2002
Posts: 348 |
OK, I set a comp for +4 and +4. I tried A/B between that comp and comp 0(+0 -0) on both my test T208M and the UGW port. I heard no difference. Then I set up comp 5 for -6 and -6. Applied to both the phone port and the UGW port. Still no difference.
Never blame on malice, what can be adequately attributed to STUPIDITY!!
|
|
|
|
Joined: Nov 2007
Posts: 2
Member
|
Member
Joined: Nov 2007
Posts: 2 |
Have you browsed to the ip address of the phone? from there you can change the mic and handset volume controls
|
|
|
|
Joined: Oct 2006
Posts: 85
Member
|
Member
Joined: Oct 2006
Posts: 85 |
If you go in through the web interface as Rony has stated you can adjust the T-phone but not the Flexset IP phone. Are you having the volume problems on FXO or outside trunks to the IP phone or phone to phone? If it is IP phone to FXO you can up volume in the FXO or in comps for the FXO trunks.
|
|
|
|
Joined: Dec 2002
Posts: 348
Member
|
Member
Joined: Dec 2002
Posts: 348 |
Duh, I forgot the browser (and Tadiran America forgot to remind me). However, I'm still having problems with satisfying the customer. 2 main complaints.
1. Dial tone blows out your ear, then you can't hear the caller.
2. Even with the volume turned up, they say the volume is to low.
Tadiran is having me upgrade everything in the system and I'm waiting for the upgrade from 15.68.05 before I can get anymore advice from them.
I've got a half million dollar project going down the drain.
Never blame on malice, what can be adequately attributed to STUPIDITY!!
|
|
|
|
Joined: Oct 2006
Posts: 85
Member
|
Member
Joined: Oct 2006
Posts: 85 |
I have had the complaint on IP phone to FXO has a lower volume than the call going out a PRI or to another digital extension. Are you using an FXO?
|
|
|
Forums84
Topics94,544
Posts640,075
Members49,857
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
99
guests, and
21
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|