|
|
Joined: Nov 2008
Posts: 32
Member
|
OP
Member
Joined: Nov 2008
Posts: 32 |
I have a 2 port DVX that is on a ACPU 8.0.2. It lost program due to power loss and I had to reload a backup and get the VMS/VMI options reloaded. That all went well, but the IDS is not seeing the DVX on the F screen. The primary station shows active (3004) and the secondary port is 3031, which shows on the F screen, but is not bold and the dvx is not identified on the left hand side of screen. If I go to the A screen and then the S to assign secondary ports, it shows the primary ports as the first 4 ports of the first station card. If I dial 436 or 3004 it just gives RNA. I can get into the program of the DVX and it looks good and the run screen looks normal. Any ideas? Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Nov 2004
Posts: 194
Member
|
Member
Joined: Nov 2004
Posts: 194 |
Executone super tech.
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
198
guests, and
332
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|