|
|
|
|
Joined: Dec 2005
Posts: 32
Member
|
|
Member
Joined: Dec 2005
Posts: 32 |
I have an IDS 108 system (ECPU 6.0.2). They have 3 analog cordless telephone extensions. I have them set up to grab intercom dial tone when going off hook. However, they would also like to be able to grab dial tone to make a CO call.
The normal codes 9+1, 9+0, 9+* are not working. I know I had this working on their system before but they had storm damage a few months back and have just realized since we replaced their CPU and reloaded programming that they can not dial a CO call from the cordless.
Is there a something I am missing in the options? The cordless phones have 300 subcode 1 keys. They have no restrictions. When he tries to dial 9+1, etc - he gets a busy signal but all lines are not busy. They do not have LCR.
AT my wits end again. Any help would be greatly appreciated!
Brenda
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2010
Posts: 250
Member
|
|
Member
Joined: Oct 2010
Posts: 250 |
Brenda. FYI There are 2 other posts in this section having to do with your problem.
Forty six years and still fascinated with Telecommunications!
|
|
|
|
|
Joined: Dec 2005
Posts: 32
Member
|
|
Member
Joined: Dec 2005
Posts: 32 |
I apologize for not seeing that post. I apparently made my search too narrow. I found the post you were referring to and that fixed my issue. Thanks John
Brenda
|
|
|
|
Forums84
Topics94,513
Posts639,939
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, justbill),
179
guests, and
49
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
