|
|
|
|
Joined: Feb 2008
Posts: 683
Member
|
OP
Member
Joined: Feb 2008
Posts: 683 |
As a followup from an earlier post, I have a few remote phones at site B that work of a 6x at site A. They are connected via VPN. I resolved earlier issues with one way audio and such, but a minor lingering problem exists. I have VM keys They will not lamp when messages are left in the mailboxes. The line keys will lamp oddly enough, but VM. The system has SW v7.2.12.2. Port forwarding has been done for 2088. Any thoughts?
St Petersburg
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2011
Posts: 8
Member
|
|
Member
Joined: Dec 2011
Posts: 8 |
I was told by tech support that the lamp messages are broadcast traffic. Is there a way to enable broadcast traffic to go through the VPN? Do the regular message lights work on the phones? (Not the PFKs but the actual message keys.)
|
|
|
|
|
Joined: Feb 2008
Posts: 683
Member
|
|
OP
Member
Joined: Feb 2008
Posts: 683 |
The message keys on site where the 6x is located do, not sure about remote phones across the VPN. Won't know until I go to site next time. Is it possible to broadcast port 2088 (I believe that's the one for BLF)? Not an IT guy, that's why I'm asking.
St Petersburg
|
|
|
|
Forums84
Topics94,297
Posts638,858
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
144
guests, and
255
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
