Phone Systems

Sponsored by Atcom
Get a free phone!
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Jan 2012
Posts: 1
Bamya Offline OP
Member
OP Offline
Member
Joined: Jan 2012
Posts: 1
i own a 3com NBX V3000 and I have been with the same telco carrier for the past 5 years. This year I decided to change to AT&T since they offered me a better deal. Last week was the turn up. All numbers and DID's were ported so I assumed there would be nothing that I need to change in the phone system/dial plan. Well apparently I was wrong. After the port the phones no longer rings with the main # is called. Instead the auto attendant answers. When calling all other DID's, the calls bypass the auto attendant and ring on the necessary phones. My question is how do I bypass the attendants when the main phone number is called and have all the phones in the hunt group ring just like all the DID's. Anyone's assistance is greatly appreciated.

I also posted this on the HP support forums See link below.

https://h30499.www3.hp.com/t5/NBX/3com-NBX-V3000-Call-routing-issue/td-p/5428723

Joined: Oct 2006
Posts: 85
Member
Offline
Member
Joined: Oct 2006
Posts: 85
In looking at your dialplan it looks like you are just looking for 4 digits in the dial plan. You could change the table to accomodate more digits in the last table it says:

PreTranslator Create 1 4Digit DDI 3Digit Internal
/ PreTransId Entry Digits
/ ---------- ----- ------
PreTranslatorEntry Create 1 1 1
PreTranslatorEntry Create 1 2 2
PreTranslatorEntry Create 1 3 3


You could change these so that it spells out the DID numbers to accomodate the carrier. You could change as follows:

PreTranslator Create 1 7Digit DDI 3Digit Internal
/ PreTransId Entry Digits
/ ---------- ----- ------
PreTranslatorEntry Create 1 1 xxx2251
PreTranslatorEntry Create 1 2 xxxxxxx
PreTranslatorEntry Create 1 3 3


listing out each of the DID numbers. You then would also have to define where they go to as follows:

/ PreTransId Entry OperId Operation Value
/ ---------- ----- ------ --------- -----
PreTranslatorOperation Create 1 1 410
PreTranslatorOperation Create 1 2 (extension to direct call at)


Just make sure that you keep the numbers in the first table 1, 2, 3, 4, 5 etc so that they match the pretranslator ID so 1 to 1 and 2 to 2 etc.


Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,375
Posts634,587
Members49,525
Most Online5,661
May 23rd, 2018
Popular Topics (Views)
Today's Birthdays
apexnetworks, blpogue, Hillyard, Silversam
Newest Members
NiagaraGuy, Luv2uallday, FredSkidoo, tspa, xtrememachines
49,525 Registered Users
Top Posters (30 Days)
Toner 17
dexman 12
R4+Z 6
Who's Online Now
0 members (), 5 guests, and 7 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Telephone Systems Canada | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5