|
|
Joined: Mar 2005
Posts: 2
Member
|
OP
Member
Joined: Mar 2005
Posts: 2 |
I recently moved an old Inter-Tel GLX system from one building to another. Everything went down without a hitch... Until they tried testing incomming calls. The LINE blinks but the phones do not ring like they did before the move. I didn't change anything in the programming. Anyone have a clue?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2003
Posts: 1,573
Member
|
|
Member
Joined: Aug 2003
Posts: 1,573 |
battery's dead om main board....
I dont remember the programming record, but somebody soon will answer and help ya.
THat battery only lasts a few years...
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Your system is back to default.
Either the batt is dead or the prg en switch was left on when you powered it down which would default it. Turn the prg en switch to on then go to a phone and press # 2 then press the lines you want to ring at that station, then pick up the hand set and hang it up again, you should hear a confirmation tone. Repeat at each set you want to ring. When finished turn the prg en switch to off.
[This message has been edited by dtmf (edited March 21, 2005).]
|
|
|
|
|
Joined: Mar 2005
Posts: 2
Member
|
|
OP
Member
Joined: Mar 2005
Posts: 2 |
There is no battery in the holder... looks like a CR2032 goes there... anyone know for sure what battery the GLX takes?
Thanks!
|
|
|
|
|
Joined: Jan 2002
Posts: 196
Member
|
|
Member
Joined: Jan 2002
Posts: 196 |
I'm 99% sure you are correct and it is a CR2032. The manual does not specify. If I get a chance, I'll try to have someone pull the cover off ours and follow up. Good luck! ------------------ COMTEK DataCom
COMTEK Technologies, Inc.™ Information Technologies Integrators™ Celebrating 37+ Years Serving California & The Western United States! (619) 266-1000 • (800) 525-7100 an interCONNECT-IT™ company
|
|
|
|
|
Joined: Nov 2006
Posts: 1
Member
|
|
Member
Joined: Nov 2006
Posts: 1 |
I lost power and my phones are not ringing. How do I program them to ring? GLX-Phones.
Thanks
Liz
|
|
|
|
|
Joined: Sep 2005
Posts: 971
Member
|
|
Member
Joined: Sep 2005
Posts: 971 |
LIZ
Look at 3rd. post previous to your question.
It is dated 3/21/2005 by DTMF.
The answer to your question.
-TJ-
|
|
|
|
Forums84
Topics93,959
Posts637,375
Members49,702
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (hitechcomm),
48
guests, and
38
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg)
