I have a mbx that I have tied to a telecenter intercom, just a single line off the telecenter tied to a co line on the mbx. My problem I'm having is that when i select the co line and do an all call there is a pause of like 3 seconds before the line connects. I'm trying to find that timer, that you shouldn't have to change really because that timer is expired by the time the other phone rings your calling, but on this setup I need it to be instant no pause.
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
I'm wondering if this might have something to do with voltage on the CO port, since Telecenter SLT ports aren't 48 volts. Maybe the MBX doesn't see this line voltage as a valid CO line? Just guessing in my quest to understand this thing myself.
I'm thinking that the "line length to 7 Km" setting is a way of telling the MBX to expect a lower voltage and to accept it as valid.
You're partially right if starting from scratch with paging. We had to get a valcom unit to up to voltage I guess one would say so that it saw the pages as a line. When you get that far, then there is a delay when you do a page before the audio starts coming through. Then you can just toggle per co line basis the time before audio passes through. I forget what it's termed off hand but once you set it to 0 it works as it should.
I was able to do what ckarabaich24 said and set the connection to immediate and its works fine. The only thing i found to be a problem was that I couldnt change that through the web admin, I had to do it through phone programming
