|
|
|
|
Joined: May 2005
Posts: 526
Member
|
|
Member
Joined: May 2005
Posts: 526 |
I have an Axcess 8.224 with a LSC w/ 4 port expander I'm using the 5th port in Trunk group 9203 and have set Hybrid ballance to short. I installed a new Valcom Talk back paging system and have had the page cut off in the middle of the page and says trunk group 9203 is unplugged. The customer says if they let it set for somewhere around an hour it sees the line again and starts working, then after 4 or 5 pages it does it again. Anyone had this problem or any ideas to help?? Can call tech support but think it might be a defective Valcom, Valcom wants voltage readings and I can't sit at the customers site all day waiting for it to happen so I can take the measurements they want
Thanks
Randy
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2005
Posts: 526
Member
|
|
Member
Joined: May 2005
Posts: 526 |
FYI...Looks like the problem was having the paging on the daughter board, not sure why but seemed to solve the issue
|
|
|
|
Forums84
Topics94,527
Posts640,019
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
155
guests, and
59
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
