PBX mode in Magix R4, V7

Print Thread

Rate Thread

Hybrid/PBX mode in Magix R4, V7 #531929 08/07/12 11:36 AM
Joined: Apr 2006 Posts: 32 mark1040 Member
mark1040 Member Joined: Apr 2006 Posts: 32	It was unable to set Hybrid/PBX mode in Magix processor CKE 5, R5, V7. The boards allow you to switch between key and behind switch mode. I bought 9 processor from internet, 4 has this type problem, even default to factory setting. Is any jumper setting on the board needed to change. Thanks,

Avaya IP Office Help & Support Website

Avaya IP Office Help & Support Website

FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Re: Hybrid/PBX mode in Magix R4, V7 mark1040 #531950 08/07/12 02:26 PM
Joined: Jun 2005 Posts: 83 lockport,ny,usa dutch Member
dutch Member Joined: Jun 2005 Posts: 83 lockport,ny,usa	on the processor there are two dip switches,both closed is permanent key mode,both open is hybryd/pbx mode.

Re: Hybrid/PBX mode in Magix R4, V7 mark1040 #531958 08/07/12 03:49 PM
Joined: Apr 2006 Posts: 32 mark1040 Member
mark1040 Member Joined: Apr 2006 Posts: 32	You are right! Thanks,

Hop To

Link Copied to Clipboard

NEC IP Phones
by juno - 04/04/25 09:05 AM

NEC IP phones rebooting
by jpet621 - 04/03/25 03:03 PM

SV9100 store hours mailbox
by muddybl - 04/03/25 02:10 PM

Forum Statistics

Forums84

Topics94,512

Posts639,934

Members49,844

Most Online5,661
May 23rd, 2018

yeloshak, ty3995, Sippy, sersmith, Taddeo
49,844 Registered Users