|
Joined: Jan 2011
Posts: 81
Member
|
OP
Member
Joined: Jan 2011
Posts: 81 |
Are the following Avanti firmwares compatible with all versions of Telrad phone systems or is there a minimum system software/card chip set level that is needed? Also, can the old Avanti firmware below be upgraded directly to the new firmware listed below via the eManager software download program?
NEW AVANTI FIRMWARE OLD AVANTI FIRMWARE sw_st30_0d_d2.hex <-------> 00_C5; 00_CF; 00_CD;00_C0; 00_B1 sw_st30-r2_50_d3.hex <-------> unknown
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
|
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281 |
There are two releases of Avanti Phones, Version 1 and 2.
Latest software on 1 is sw_st30_0B_d2.hex Latest software on 2 is sw_st30-r2_10_d3.hex
I recommend loading the latest on all phones.
You can't load version 1 on 2 or 2 on 1.
Depending on witch HEX file you use, only that version phone will show up.
You do need to have the correct processor. 7.39 I believe was the start of software download Plus the chip in the uld cards must be 1.05 or above.
Not positive on the chips or MPD version but if you are using MPD2 or IPEX you will be fine. Make sure you ULD chips are the latest to be sure with 2.06
I also recommend upgrading one or two phones at one time. If the upload process gets interrupted you will not be able to reload the software.
|
|
|
|
Joined: Jan 2011
Posts: 81
Member
|
OP
Member
Joined: Jan 2011
Posts: 81 |
Thanks, regarding the interruption during upload, does a phone that shows a firmware of FF_FF mean that the process was interrupted and the phone is now no good?
|
|
|
|
Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
|
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281 |
That sounds very familiar, I'm almost certain that's what it will say.
The phone is still good. You just have to get a replacement chip.
|
|
|
|
Joined: Aug 2002
Posts: 4,919 Likes: 1
Administrator
|
Administrator
Joined: Aug 2002
Posts: 4,919 Likes: 1 |
Latest for rel 1 phones is now 0D-D2. Also note that 0D-D2 and 10-D3 firmware may not worl on Rel 7 systems.
|
|
|
|
Joined: Jan 2011
Posts: 81
Member
|
OP
Member
Joined: Jan 2011
Posts: 81 |
|
|
|
Forums84
Topics93,967
Posts637,413
Members49,704
|
Most Online5,661 May 23rd, 2018
|
|
1 members (tech3500),
125
guests, and
34
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|