|
|
|
|
Joined: Nov 2005
Posts: 31
Member
|
OP
Member
Joined: Nov 2005
Posts: 31 |
I have an 8690 here that I would like to program. We have an IPRC card that is setup and I have other IP phones configured but this is a completely different beast. Where do I go to tell the 8690 where the IPRC card is located? All I can really find to configure is for Unified Communicator which we are having installed later this week. Any help would be greatly appreciated.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2005
Posts: 840
Member
|
|
Member
Joined: Sep 2005
Posts: 840 |
Well, it's really not that different. Program an available IP ext. w/ the fone's MAC address and the fone should come up if it is on the same LAN as the IPRC. If you need to program the remote IPRC address, browse the fone on port 8080. Sounds like you've got the UC part figured out, the fone is pretty underwhelming w/o UC.
|
|
|
|
|
Joined: Jan 2008
Posts: 13
Member
|
|
Member
Joined: Jan 2008
Posts: 13 |
I know this is an old post, but I am having the same issue. When I browse the "fone" it asked for a username and password. Anyone know the defaults for these items?
|
|
|
|
Forums84
Topics94,287
Posts638,784
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
