|
|
Joined: Dec 2005
Posts: 279 Likes: 1
Member
|
|
Member
Joined: Dec 2005
Posts: 279 Likes: 1 |
I have a question regarding the OS 7200. I am trying to use a Valcom multi-zone paging setup. When the Valcom gets the contact closure, it sends a tone waiting for DTMF signals to choose one or all zones. I can hook a butt set up and tell the Valcom is sending it's "waiting" tone if you will, but the DTMF is not reaching it from the Samsung. Any ideas would be appreciated. The old setup they had used CO port paging, which is a bit rough when I have moved them solely to a PRI for the system. Thanks in advance for any help and I hope everyone has a good New Year!
When I die, I want to go peacefully in my sleep like my grandfather, not screaming and panicking like the passengers in his car.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
That is a bitch, no DTMF is supposed to pass that I know of, better off putting in a CO card if you have room.
If it is from just one extension that you have to do the paging, there used to be some inline dialers that you put between the handset and the phone and pressed the touch tone button you needed, made $600 off an NEC console that way once. Maybe Mike Sandman would have or know of where there are some.
If everyone has to dial, then a CO card is about the only other way I know, no "override" code.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Dec 2005
Posts: 279 Likes: 1
Member
|
|
Member
Joined: Dec 2005
Posts: 279 Likes: 1 |
Thanks Bunnie. I was afraid of that being the case. Other than that it was a smooth install, I appreciate the info. I have ordered a CO card at the customers behest and shall have CO port paging hooked up in a day or two. Thanks again for the reply.
Last edited by Herk; 12/28/12 01:53 PM.
When I die, I want to go peacefully in my sleep like my grandfather, not screaming and panicking like the passengers in his car.
|
|
|
|
|
Joined: Sep 2004
Posts: 395
Member
|
|
Member
Joined: Sep 2004
Posts: 395 |
If you have analog stations already, you could then use a station port paging access unit. Might be cheaper than a co card.
|
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
Maybe I'm wrong, but if you dial an analog extension, it should be locked to 3 digits same as digital.
It is getting the audio over the talk path that is the reason for the inline dialers.
Had to do that way back in the day of the Businesscom Plus and voicemail.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
Forums84
Topics94,515
Posts639,947
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
280
guests, and
27
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
