|
Joined: Jan 2013
Posts: 3
Member
|
OP
Member
Joined: Jan 2013
Posts: 3 |
I replaced a 2 line 6 station card (E206). Green light is on but no lines or stations. Does the new card need to be initialized and if so, how? Any help would be appreciated.
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
it should come right up the 206s are all pretty old are you sure the one you used is good ?
what processor or is this a stand alone 206 ?
Skip ------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
Joined: Jan 2013
Posts: 3
Member
|
OP
Member
Joined: Jan 2013
Posts: 3 |
It is a refurbished one I purchased. I didn't think it needs to be initialized. I had problem getting it to seat right. It is not a stand alone, has one other 206 that works fine. I read somewhere that a new on came with plastic protectors. I didn't check for that and I didn' think a refurbished one would have them. All I really needed to know if it copmes roght up once it's replaced. Thanks
|
|
|
|
Joined: Jul 2001
Posts: 3,344 Likes: 10
Moderator-Avaya-Lucent, Antique Tele
|
Moderator-Avaya-Lucent, Antique Tele
Joined: Jul 2001
Posts: 3,344 Likes: 10 |
there is no cofiguration or initialization needed. It won't even go in the slot with a plastic protector installed, but I've only ever seen the protectors on the Processor, which is a completely different card edge connector and connector size than the 206. If it's a good card, it will come right up
|
|
|
|
Joined: Apr 2002
Posts: 147
Member
|
Member
Joined: Apr 2002
Posts: 147 |
What is your system card configuration, which one are you replacing and what is the version of the processor? Do you have a backup card?
|
|
|
Forums84
Topics94,294
Posts638,835
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
87
guests, and
340
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|