|
|
|
|
Joined: Mar 2008
Posts: 250
Member
|
OP
Member
Joined: Mar 2008
Posts: 250 |
I have a customer with a PCM paging system. It's made by bogan but it has a Avaya name plate. The problem is we changed phone systems and the old interface was a unused trunk port, now it is a analog extension. I changed the DIP switchs for the proper setting but when I plug the extension in it goes off hook, then when you try to page it is busy. Could it be a bad TIM card?
|
|
|
|
|
Joined: Feb 2005
Posts: 12,343 Likes: 3
Member
|
|
Member
Joined: Feb 2005
Posts: 12,343 Likes: 3 |
I think you have the DIP switch set incorrectly. Everything except S6 is set to off. Connect to the TEL LINE jack.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: Mar 2008
Posts: 250
Member
|
|
OP
Member
Joined: Mar 2008
Posts: 250 |
I've got the dip switches set correctly, just like you say, only sw 6 is on
|
|
|
|
|
Joined: Mar 2008
Posts: 250
Member
|
|
OP
Member
Joined: Mar 2008
Posts: 250 |
Ordered a new TIM card and now everything works. the station port must have been bad.
|
|
|
|
Forums84
Topics94,282
Posts638,763
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
