sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems Panasonic TVA50 VM on a Samsung DCS Anyone do this?

I trying to get a Panasonic voice mail to work on an old Samsung DCS system with a SLT ports using inband signaling.
Any help would be greatly appreciated.

Larry Hall
Electro Mechanical Technology
Mulberry IN

MMC 726 This is ancient and I think might work, old, old notes that I am not positive are correct but worked with Amanda Soho, never tried with Panasonic so are a starting point, good luck and hope some overzealous mod doesn't think 20 year old notes are super secret info.

AUTOMATED ATTENDANT
Ext for DN1 Yes
Trk for DN1 Yes
Ext for DN2 No
Trk for DN2 No
Separator No
Disconnect C

CALL TYPE ID
Direct Call *
All Fwd Call #
Bsy Fwd Call #
NOA Fwd Call #
Recall #
Dir Trk Call 6
Overflow #
DID Call #
Message Call *

CALL PROGRESS TONES
Dial Tone BA
Busy Tone 4
Ringback Tone 5
DND No More 6
Hdst Ansr 3Spkr Ansr 3

Thanks I got that part figured out. I’m able to get the VM to answer calls and transfer call to phone but cannot get the VM to answer when the phone is in call forward or DND. The VT button works and when you call VM from phone it will as for password for VM. Just cannot get the forward and DND part to work.

Larry

Such a Small world.

Just went to a new customer, dying Panasonic with a New TVA50 !??
So I am facing the same problem.

I expect it to work, I have another client I hooked a DCS to an older Panaconiv 100/150 VM. Not the most seamless, but worked better than the 100 hooked to their old ITT key system.
The cleint had lower expectations because they already had to dial ....like #8ext....no inband signaling.

Bunnies Info, as you knew, was good to have.
Did you ever get it fixed?
It sounded like a FWD or DND call "was not" answered at all?
did it just ring no answer?


Look forward to your results.
If I get it before you do Ill let you know

The client had the CD for the TVA
I noted inband signaling as:
CALL TYPE ID
Direct Call
All Fwd Call 6
Bsy Fwd Call 7
NOA Fwd Call
Recall 3
etc etc
BUT that is example of non Panasonic PBX.

So it WILL go behind a Samsung.
The other client I had was alreadu a non Panasonic, so my hook up was easier. I matched the Samung to the existing signaling.
IF the TVA50 VM is already behind a Panasonic KSU, we will HAVE
to go into VM programming and set System Parameters.
If there are default digits in the VM, I will set the samsung to them...easier to change the DCS in the future.

I did not want to learn the new VM, looks like I will have to.
They have an extensive TREE....so I don't know if changing PBX type will cause any defaulting actions.
Also there are Passwords (admin & Programmer) that may be changed from default.

(I found the manual free online before I found this CD.
Windows based programming)