sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems DSS NS Key

Im networking two systems for the first time, and I can't work out the NS keys.

It seems I can call between the systems now.

System A Extensions 22xx
System B extensions 24xx

When I try to setup the NS key, i only can set up an NS24 key, and cant set the full NS2401 for example.

Any tips anyone can give or PM me?

Nothing to obvious there. Just checked an old config i had my NLCR digits set to 50 and had keyphones programmed with NS501 etc

That was on V4.46e

You could try setting your NLCR to a 3 digit (as a test)

e.g NLCR 220
NS 220X

That did not help, it now won't add any NS key or dial any network station i.e. 240x unless i type 240xx

Program ns key with keyset not dm. Its a bug.

Doesn't matter of i use the OSM or the key set.. I still am only able to program NS24 or i get an error...

Just another update..

When I call from system A (Ext 3202) Node 092 to B (Ext 2420) Node 094.

On the handset i'm calling from, when I call ext 2420, my handset says I've called Extension 24. Not EXT 2420.

On the receiving extension I am getting the Extension call from as 0923202 instead of the name of the extension calling.. Am I meant to manually set up CID for each extension remotely.. ? I assume I've missed something.

You haven't setup your network dial translation mmc correctly on 1 or both systems.

If you send me your db's ill check your settings.

You may have missed some settings in the networking options mmc as well

Sounds like in your LCR modify table you've added the node number to impend aswell as having the node+NLCR code in your LCR Digit tables.

*edit* Bit too much information for public forum


I can also email you our networking cheatsheet.

Finally found the issue.. "Wait length" in 824 set differently.

I thought this was a timeout, not the number of digits! Maybe a terminology issue on OSM