NEAX 2000 IPS Messege Waiting light...

Print Thread

Rate Thread

Page 2 of 2

Re: NEAX 2000 IPS Messege Waiting light... lynxdbe #550095 04/18/13 07:58 AM
Joined: Nov 2006 Posts: 264 Amman Lee07 Member
Lee07 Member Joined: Nov 2006 Posts: 264 Amman	lynxdbe Also, you wrote: "....201=A590 and A591 I set to 123, 124 and I get restricted or a fast busy when I dial *1 anything. If there is something here I have wrong or am missing please fill me in." Are you using numbering plan (1)? If not you have to use CMD200 to set your codes...! Last edited by Lee07; 04/18/13 08:00 AM. Lee

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: NEAX 2000 IPS Messege Waiting light... lynxdbe #550107 04/18/13 09:18 AM
Joined: Feb 2005 Posts: 600 Likes: 4 Western Australia R4+Z Member
R4+Z Member Joined: Feb 2005 Posts: 600 Likes: 4 Western Australia	I should also ask if the FOH (front of house) system integrates with the NEC as these message wait lamps could be being set by MCI. There is a way to get these turned off by using an MCI simulator but that is way more complicated!

Page 2 of 2

Moderated by ttech

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems NEC Telephones & Systems NEAX 2000 IPS Messege Waiting light...