|
|
|
|
Joined: Mar 2005
Posts: 1
Member
|
|
Member
Joined: Mar 2005
Posts: 1 |
I need to put together a SOP for testing digital, analog and isdn lines once installed and programed.Basically a standard procedure to make sure it is programed correctly and the line works as it is suppose to. To include outgoing,incoming, internal, Special dial codes and dsn. Don't want to miss anything so i was wondering if anyone has A SOP put together for testing the PHone and lines. This is for a 81c mostly but could include other switches. either way the procedure should be the same. Thanks in advance..
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2004
Posts: 90
Member
|
|
Member
Joined: Apr 2004
Posts: 90 |
sounds like you might want to get a telcom engineer involved. They write most of the telco's TPs.
|
|
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
Nortel has engineering service for a fee. I would suspect it's already written.
|
|
|
|
|
Joined: Mar 2005
Posts: 97
Member
|
|
Member
Joined: Mar 2005
Posts: 97 |
Bikechuck and jw are right. Engineers are MADE (born?) for this sorta thing. Good luck not missing anything because there are wayyy too many variables built into all the variables. Besides, how much time do you want to spend testing each individual phone? That sounds like what you are looking for.
Oowch. that would be very hard on the bottom line.
|
|
|
|
Forums84
Topics94,521
Posts639,995
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
208
guests, and
49
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
