|
|
Joined: May 2013
Posts: 3
Member
|
OP
Member
Joined: May 2013
Posts: 3 |
I have a customer with a Small Office Lite that doesn't light the message waiting lamps. I initially connected it via serial integration and then for some reason many years ago, that stopped working. I then manually input the on and off codes for message waiting in each mailbox and that worked fine. The system still answers, takes and stores messages but it's not sending the code to light the lamps. I rebooted it several times and noticed on start-up it does not show the "Updating message waiting lamps" screen - the field is blank. Any suggestions?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2002
Posts: 66
Member
|
|
Member
Joined: Nov 2002
Posts: 66 |
Did you do the "First time setup" when the serial integration stopped working? If not I recommend doing that instead of manually putting in the codes.When it asked do you want to use the serial integration just say no. When you put in the type of PBX it will input the lamp codes for you. Hope this may help.
Last edited by scott leming; 05/08/13 06:24 PM.
|
|
|
|
|
Joined: May 2013
Posts: 3
Member
|
|
OP
Member
Joined: May 2013
Posts: 3 |
Thanks, I'll give it a try.
|
|
|
|
Forums84
Topics93,968
Posts637,416
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
