sundance-communications.com/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems KX-TDA 50 ringing

I have a customer that has just acquired a seventh site that has a KX-TDA50 I can take it off of the v.m. pg 420 and make it ring on sta. 101 but they want it to ring on more phones. I blanked the DIL but and have the stations in an ICD group can't get them to ring I this is the only Panasonic that I am working on and I don't want to buy the software.

You have the lines ring the ICD group. Also in ICD group Programming the ringer can be off. on or delayed.
Depending on system setup you may need the console to access these programs.

I think I do need the console to make the lines ring the ICD group, I can program the immediate or delay with pgm 621, I couldn't find a place to make the line ring the ICD group.

If I understand what your saying, by blanking out the DIL tables your lines won't ring. DIL the lines to the ICD group?

It won't accept oo1 the ICD group number

unless you changed the floating number for the ICD group, default numbers start at 601

601 is the number for ICD group 001

if you have the exts programmed into IDC group 601 and the lines DIL to 601 then it shoud work unless the exts aren't programmed for immediate ring

The standard disclaimer is I wouldn't wish this on my worst enemy, but you can muck around in 450 and reprogram the destination of each line to an ICD. That, coupled with your 421 and 422 or is it 422 and 423 programs will give you the ability to make phones ring per line.

Carl