|
|
|
|
Joined: May 2013
Posts: 1
Member
|
|
Member
Joined: May 2013
Posts: 1 |
I have gone through the how to guide of how to setup an Expansion Cabinet on an existing Officeserv 7030.
Powered both off, set them both to Master and Stand alone. Powered them both on and set the IP Addresses.
Master is 192.168.0.3
Slave is 192.168.0.6
Gateway is 192.168.0.1
Subnet is 255.255.255.0
Told each system the IP address of the other system.
Powered them both off, set one as Master and set for Master/Slave, set the other as Slave and set for Master/Slave. Connected the official Samsung Link cable and then powered both up.
The Expansion Cabinet will not connect.
I have an EPM in each system and i am using the approved link cable to link systems.
The digital phone on slave system is just stuck showing version info and clicking.
Both systems on v4.53b
Both systems work in Master mode
Any ideas??
Thanks in Advance
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2005
Posts: 574
Member
|
|
Member
Joined: Jun 2005
Posts: 574 |
Everything you said seems to be ok
What I would check are leds on emps
can you ping both addresses did you recycle power on both systems
and check dip switches
|
|
|
|
|
Joined: Apr 2011
Posts: 200
Member
|
|
Member
Joined: Apr 2011
Posts: 200 |
check the DIP switch setting on board,if i remember 1 will be on 2 will be off OR 1 will be off and 2 will be on .(Try on Master & slave).
Last edited by Tariq; 05/24/13 12:46 AM.
|
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
Make sure dip switch 6 on the cabinet is off, otherwise it will default your ip address to factory each time.
Also make sure you haven't mixed up the order of the leads (the ones we get here are numbered at each end not sure on what the uk get)
2 cabinet OS7030's are a pain
Last edited by nameless; 05/24/13 01:56 AM.
|
|
|
|
|
Joined: Nov 2009
Posts: 602
Samsung Moderator
|
|
Samsung Moderator
Joined: Nov 2009
Posts: 602 |
2 cabinet OS7030's are a pain 1 7030 cabinet is a pain - fixed that for you 
|
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
Single cab's aren't too bad, good for an ip capable replacement for the dcs408 for example.
The price difference between a 2 cab os7030 and a os7100 is neglible here so we don't bother with them (all the issues they had with firmware prior to 4.4x and the cpld 2 cabinet issue didnt help)
I do know they have a higher return rate then the rest of the OS7000, and have had more issues too
|
|
|
|
|
Joined: Jan 2008
Posts: 181
Member
|
|
Member
Joined: Jan 2008
Posts: 181 |
I'm sure when you boot them up in stand alone mode you need to set the dip switches on the epm to both ON, once configured set the dip switch in master cab to 1 ON 2 OFF and Slave cab 1 OFF 2 OFF.
Are you using key phone prog or pcmmc?
|
|
|
|
Forums84
Topics94,525
Posts640,013
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
153
guests, and
44
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
