|
|
Joined: Sep 2011
Posts: 83
Member
|
Member
Joined: Sep 2011
Posts: 83 |
I cannot get caller ID to display on all 9 Telephones that I have connected to a MICS with 5.0 software. I can program 1 Telephone and 8 Lines for caller ID. Can Caller ID appear on all Telephones with this 5.0 software?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
I cannot remember which software level went from only 1 phone showing CLID to Any showing CLID. But it is easy to find out. Did you program caller ID under each set extension, Telco Features, Feature assign, Line, Caller ID: Y ??? If you did then you can do that to all phones. If you did not then you probably programmed it under Lines. Then only one phone can auto show.
And either way, they can still use Feature 811.
If CON is the opposite of PRO Then what is the opposite of Progress?
|
|
|
|
Joined: Mar 2006
Posts: 642
Member
|
Member
Joined: Mar 2006
Posts: 642 |
The line also needs to be set to ring on the sets you want caller ID on
Last edited by kjwiewall; 06/10/13 09:14 PM.
"90% of the politicians make the other 10% look bad" Henry Kissinger
|
|
|
|
Joined: Feb 2005
Posts: 1,615
Member
|
Member
Joined: Feb 2005
Posts: 1,615 |
It is 6.1 required to get CLID to all sets....sorry!. Programming a Feature 811 key is not all that bad.
|
|
|
Forums84
Topics94,525
Posts640,013
Members49,852
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
153
guests, and
44
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|