|
|
Joined: Feb 2013
Posts: 6
Member
|
Member
Joined: Feb 2013
Posts: 6 |
Hi Hope someone can help me.
I've got 6 nodes connected using SPNET. Node 1 is a OS 7400 on V4.70 software. Node 2 and 3 is 7200's on ver 4.6. node 4 is an OS 100 with mgi card. node 5 is a 2-cab 7030 ver 4.53c and node 6 is a OS 7070 on ver 4.70 software.
The current setup of PABX to PABX communication is via IPSEC VPN on the internal LAN Address and Firewall/Port Forwarders are not applicable on the LAN to LAN VPN. All ports are allowed in the VPN channel.
I can phone between node 1 to 5 without any problems.Node 4 and 5 can phone node 6. When i phone to node 6 from node 1,2 and 3 i get "no user response. When node 6 phones node 1,2 or 3 and you return the call to node 6 within 20 seconds it works.
Everyone tells me that the billion router keeps the route in memory for 20 seconds and that is why i can return the call. When i replace the OS 7400 with a OS 7030(for testing)i can call node 6 without a problem.
Please help.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Oct 2010
Posts: 182
Member
|
Member
Joined: Oct 2010
Posts: 182 |
You must append the # to make an inmediate call between systems.
Does the problem is random or always happens?
|
|
|
|
Joined: Feb 2013
Posts: 6
Member
|
Member
Joined: Feb 2013
Posts: 6 |
Hi Francisco
This problem always happens. If I dial the SPnet group then the system id then the extension number and then the # the call also fails.
Regards
|
|
|
|
Joined: Jun 2005
Posts: 574
Member
|
Member
Joined: Jun 2005
Posts: 574 |
Make sure you can ping the systems Had problem like yours was because ping was not enabled but you have vpn don't believe you need that enabled
|
|
|
|
Joined: Feb 2013
Posts: 6
Member
|
Member
Joined: Feb 2013
Posts: 6 |
Hi
I can ping the system no problem. I can phone from node 6 to node 1. When I phone from node 1 to node 6 I get no user response. When I phone from node 6 to node 1 end the call and phone within 20 seconds from node 1 to 6 the call goes through.
Don't know what to do anymore
Thanks
|
|
|
|
Joined: Aug 2011
Posts: 219
Member
|
Member
Joined: Aug 2011
Posts: 219 |
make sure mmc861 and 825 is set to mcp signalling. Was stuck in similar situation and stumbled on this by accident
heads up
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
No user response means the systems can't talk to each other (in this case the response from node 6 isn't getting to node 1).I've seen this before with public registered systems (firewall not keeping the ports open), a vpn usually fixes it.
Check your route tables when the call fails
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
1 members (justbill),
133
guests, and
40
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|