|
Joined: Jun 2005
Posts: 114
Member
|
Member
Joined: Jun 2005
Posts: 114 |
Setting up a system for a branch of our college campus.
Incoming calls hit Custom service. When the caller dials a particular extension ( which is CF/All to cell phone i.e. 7139nxx-xxxx), and the forwarding does not work! I think I checked all the settings, but I am not as familiar with TVA as TVS..
I didn't forget to use "9" as a prefix. I tried putting the extension in the alternate transfer Extension group, and set the sequence to FX;D ( which had worked with the TVS and TD816). I tried all kinds of transfer sequences ( FXD, FTX;D, etc. )
Any help much appreciated!
The call does not have to hit an extension - if the TVA50 could dial the outside number when caller dials the extension, that would be OK..
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jan 2007
Posts: 2,125 Likes: 4
Admin
|
Admin
Joined: Jan 2007
Posts: 2,125 Likes: 4 |
because you are using extension call forward all the settings are on the phone system.
is fwd to co enabled on the telephone system.
try doing a no answer fwd to co on the extension and see if the call will go after a few rings, I beleive I had a problem with straight transfer from voicemail which would be seen as a transfer to co.
you could get the voicemail to do it,but it wont allow you to receive calls on the system phone if you wanted
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
Joined: Jan 2008
Posts: 227
Member
|
Member
Joined: Jan 2008
Posts: 227 |
You wrote that the FWD doesn't work. Just what happens to the call? As OBT said check in the switch that CFW to CO is enabled for that extensions COS.
Tele-Net Technologies Certified Panasonic dealer
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
Member
Joined: May 2003
Posts: 2,924 |
Transfer to CO and CF to CO set?You can xfer to out in the TVA if it need not ring a phone. You can xfer to out in the mailbox personal AA.
Last edited by brokeda; 09/19/13 09:11 PM.
|
|
|
|
Joined: Jun 2005
Posts: 114
Member
|
Member
Joined: Jun 2005
Posts: 114 |
Gents,
Thanks much for the replies. Sorry I have not gotten back quickly- the site is at a distance, and I don't go every day..
Finally got it to work. You were right about the CF to outside in the COS for the extension - it was disabled. I also had to change Transfer to CO and CF to Co ( programs 606 and 607 ). I did have to put the extensions into the Alternate group, and set the sequence to FX,D
Thanks for telling about direct transfer to outside in the TVA. That would be perfect since no phones are ever used at these extensions.
I have another question, but will put it in a separate post..
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Taddeo),
145
guests, and
30
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|