|
Joined: Nov 2013
Posts: 65
Member
|
OP
Member
Joined: Nov 2013
Posts: 65 |
Hello!
I am brand new here so I am just learning my way around. My company has an Electra Elite IPK, with ESIB8 and COIB4 U30. My question is how do we enable the Caller ID. We have been using it without it, but would like to program it. I set up this system but never tried caller ID. Here are my software versions: SP1012/ CPUI = 2.02/ ESIB8 = 1.00/ COID4 = 4.00
Is this the proper software to have CID, and if so, what memory block should I use to set it? I tried earlier, by going off-line, MB7-1, slot 02: COID 4 =05.
Thanks for your help in advance.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
You probably just need to turn on the option in the class of service. Do you know for sure your telco is sending CID info?
|
|
|
|
Joined: Nov 2013
Posts: 65
Member
|
OP
Member
Joined: Nov 2013
Posts: 65 |
Hi!
Yes, we have call ID. I checked with my service provider just to be sure and we do. Is there something in the programming that I missed?
|
|
|
|
Joined: Jul 2005
Posts: 1,334
Member
|
Member
Joined: Jul 2005
Posts: 1,334 |
Run thru the Caller ID Wizard in MAT and check. As DrPBX says it appears that you only have to turn it on in the station CLS..
Regards,
Paul W Now back to a 0 day week. Love these 7 day weekends.
|
|
|
|
Joined: Nov 2013
Posts: 65
Member
|
OP
Member
Joined: Nov 2013
Posts: 65 |
Thank you. Caller ID works! As I was in the Class of Service settings, I noticed that I could not get page 7. I also now realized that we can't use the interactive soft keys on our phones. I looked at the programming manual and that setting is on page 7 of CLS. I would really like to get change the setting on page 7. Any reason why I can't get page 7?
Thanks.
|
|
|
|
Joined: Jul 2005
Posts: 1,334
Member
|
Member
Joined: Jul 2005
Posts: 1,334 |
The only reason I can think of is that the system software and MAT don't support page 7 if your talking about the CLS pages.. In theory all IPK1 systems should be able to access page 7 only the old Elite 192 can't..
Regards,
Paul W Now back to a 0 day week. Love these 7 day weekends.
|
|
|
|
Joined: Apr 2007
Posts: 1,439
Member
|
Member
Joined: Apr 2007
Posts: 1,439 |
I think you had to have system software 5.03 or higher for caller ID on the E192 and version 1.02 or higher on the IPK.
See if you have access to program 1-1-77, if so you'll need to set it for CID to work.
Check your software level by pressing [feature]then 3 on any phone.
D
|
|
|
Forums84
Topics94,299
Posts638,875
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
125
guests, and
317
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|