|
|
|
|
Joined: Feb 2010
Posts: 505 Likes: 1
Member
|
|
Member
Joined: Feb 2010
Posts: 505 Likes: 1 |
I am going out to a customer site to possibly add a PRI Card on there DSX 80 phone system (if there is enough room )
does anyone have a cheat sheet on what programs I need
I thought I saw a cheat sheet on this site a while back
I have never installed a PRI on a DSX but have installed plenty of them on Aspire SV 8100 I-Series
Thanks
JD
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2010
Posts: 505 Likes: 1
Member
|
|
Member
Joined: Feb 2010
Posts: 505 Likes: 1 |
I found a copy of the data base they have 1 slot available
slot 1 =16 port station Card
slot 2 =16 port station card
slot 3= 8 port co card
Slot 4=Unassigned
I think I will have to put them in a 160 KSU because they are looking at porting some faxes
so I will need a SLIU card
|
|
|
|
|
Joined: Oct 2012
Posts: 252
Member
|
|
Member
Joined: Oct 2012
Posts: 252 |
You should have enough room if you are replacing the CO's with the PRI - gives you an extra card slot.
As far as the programming goes, it's pretty easy with the System Administrator software.
Card Slot Programming - Program 1213 - populate per carrier,
Program 3101-DID/Wink, 3121-T1/PRI : *ANI*DNIS*, Program 3301 & 3302 are pretty self-explanatory to map the DIDs
|
|
|
|
|
Joined: Feb 2010
Posts: 505 Likes: 1
Member
|
|
Member
Joined: Feb 2010
Posts: 505 Likes: 1 |
Hi Ken
Thanks for the info .I believe they will be removing the C.O. Trunk card but adding a SLIU Card
I believe this goes over on the load factor by 1
1 CPU =12
2 16 port station =16
1 8SLUI=5
1 T1/PRI=8
total =41 /5Vdc
Total =48/40vdc
|
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
|
Member
Joined: May 2003
Posts: 2,924 |
no it's 36 5v and 48 40v is it not?.
Last edited by brokeda; 11/27/13 12:08 AM.
|
|
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
I put in a 160 with PRI back in the summer. Pulled all docs off the DSX web site. Programmed all on the shop workbench then took it to the site for a test run after they closed. Had to have surgery to have the grin removed after in/outbound calls processed without issue. It's a sweet little system and if this brain dead Comdial trained old sailor can do it anybody can! I've been back to site 2 times and both were user issues. I replaced a full IP WIN system.
|
|
|
|
|
Joined: Dec 2003
Posts: 26
Member
|
|
Member
Joined: Dec 2003
Posts: 26 |
I believe there is a 32 station port max on the DSX80
so you will need to expand to the 160
pots
jb
|
|
|
|
|
Joined: Apr 2005
Posts: 2,526 Likes: 4
Member
|
|
Member
Joined: Apr 2005
Posts: 2,526 Likes: 4 |
You should channel bank the fax lines
We get old too soon, smart too late
|
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
|
Member
Joined: May 2003
Posts: 2,924 |
Boy I can't add . It is 41 and 48.
|
|
|
|
Forums84
Topics94,526
Posts640,015
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
