|
|
|
|
Joined: Aug 2009
Posts: 432
Member
|
OP
Member
Joined: Aug 2009
Posts: 432 |
Have a DSX 40 with 2 CO and all 10 Speed Dial programmed on each phone. Customer wants incoming call Transferred to Speed Dial which is employees cell. Is it FLASH + TRANSFER + SPEED? I was told that I need to program F and P before each number on each Speed Dial as well.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
|
Member
Joined: May 2003
Posts: 2,924 |
If using Telco Transfer Disconnect it would be Fxxx-xxx-xxxx or FFxxx-xxx-xxxx. Use would be you are on outside line with party, just press speed button and either wait for answer and screen call or hang up upon hearing ringing. Depending on Telco might need P after F or ff. Usually with FF it works also as std speed dial.
If no Telco Xfer, speed = xxx-xxx-xxxx. Use would be on outside line, Press Transfer, pick outside line then press speed button, wait to screen or hang up upon ringing. You could put 9 with speed dial and skip a step.
Last edited by brokeda; 12/10/13 05:57 PM.
|
|
|
|
|
Joined: Aug 2009
Posts: 432
Member
|
|
OP
Member
Joined: Aug 2009
Posts: 432 |
|
|
|
|
Forums84
Topics94,293
Posts638,829
Members49,768
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
127
guests, and
229
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
